Eaton Powerware 9910-E64 - Page 35

Powerware Power Protection Handbook for IBM 9910 International System i and System p Applications
34
E83 Rear Panel
What’s Included with the E83 UPS
• 8000W/10000 VA, 220V nominal, optional 208, 230–240V UPS
• (4) Battery Trays (IBM Part Number 44V3920)
• (Internal) Accessory Kit (no IBM PN)
- Mounting Brackets front and rear
- Rails (left, right) and hardware
• (External) Accessory kit (IBM Part Number 44V3919) consisting of:
- Powerware 9140 (9910 E82 & E83) Installation Guide for IBM Applications
- User’s Guide CD (in Nine languages)
- Powerware Software Suite CD
- Serial Cable, RJ-45 to DB-9 (6 ft/1.8m)
- Serial Cable, DB-9 to DB-9 (12 ft/3.6m)
- REPO Connector Plug 10A, 2-pin
E83 Options
Various options are available depending on application. For System i or System p applications,
consult chart below to select appropriate feature codes to order with the E83 UPS.
Description
IBM Feature
Code
IBM Part
Number
POWER
(AIX, Linux),
System p Rack
Worldwide
POWER
(IBM i),
System i
Rack
Worldwide
ConnectUPS-X Web/SNMP Card 2934
1
39J4824 Yes No
X-Slot Relay/Serial Card Kit 2939
1
42R4332 No Yes
Extended Battery Module (EBM)
(up to 4 EBMs)
6646 44V3921 Yes Yes
EBM Accessory Kit (1 per FC 6646) - 44V3922 Yes Yes
PDU to UPS Power Cord 2974
2
42R4333 Yes Yes
1. Maximum one FC 2934 or 2939 per E83 UPS. ConnectUPS-X Web/SNMP Card required if implementing Logical Partitions (LPARs)
on POWER Systems (AIX or Linux), p5 or System p. 2. Used to connect a 7188/9188/5889/7109 PDU to the C19 outlet.