Eaton PowerXL DG1 Series VFD - Parameter Reference Overview

12
Step 5 — Standard application
POWERXL DG1 SERIES ADJUSTABLE FREQUENCY DRIVES MN040012EN—December 2017 www.eaton.com
Standard application—parameters list
On the next pages you will find the lists of parameters within the respective parameter groups.
Column explanations:
Code = Location indication on the keypad; shows the operator the present parameter number
Parameter = Name of parameter
Min = Minimum value of parameter
Max = Maximum value of parameter
Unit = Unit of parameter value; given if available
Default = Value preset by factory
ID = ID number of the parameter
Table 7. Monitor—M
Code Parameter Min. Max. Unit Default ID Note
M1 Output Frequency
Hz 0.00 1
M2
Freq Reference Hz 0.00 24
M3
Motor Speed rpm 0 2
M4
Motor Current A 0.0 3
M5
Motor Torque % 0.0 4
M6
Motor Power % 0.0 5
M7
Motor Voltage V 0.0 6
M8
DC-link Voltage V 0 7
M9
Unit Temperature °C 0.0 8
M10
Motor Temperature % 0.0 9
M12
Analog Input 1 Varies 0.00 10
M13
Analog Input 2 Varies 0.00 11
M14
Analog Output 1 Varies 0.00 25
M15
Analog Output 2 Varies 0.00 575
M16
DI1, DI2, DI3 0 12
M17
DI4, DI5, DI6 0 13
M18
DI7, DI8 0 576
M19
DO1, Virtual RO1, Virtual RO2 0 14
M20
RO1, RO2, RO3 0 557
M41
PT100 Temperature °C 1000.0 27