Need help?Do you have a question about the Eaton Matrix 2000 and is the answer not in the manual?
General| Apparent Power | 2000 VA |
|---|---|
| Real Power | 1600 W |
| Frequency | 50/60 Hz |
| Battery Voltage | 48 VDC |
| Output Waveform | Sinewave |
| Waveform | Sinewave |
| Protection | Overload, Short Circuit, Over Temperature |
Provides a summary of the Matrix 2000 Inverter's features and capabilities.
Lists the different part numbers for the Matrix 2000 Inverter models.
Details the components visible on the front panel of the inverter.
Illustrates and describes the connections and components on the rear panel.
Introduces the necessary steps and considerations before installing the inverter.
Covers general guidelines and safety precautions for preparing the installation environment.
Outlines essential safety measures for handling batteries to prevent injury and damage.
Provides instructions for checking the inverter for transit damage and reporting issues.
Introduces the installation process for the Matrix 2000 Inverter.
Specifies the recommended environmental conditions and placement for inverter installation.
Guides on safely unpacking the unit and performing an initial inspection for damage.
Details the procedures for physically mounting the inverter in a rack.
Explains how to connect the inverter to the AC power source and loads.
Provides instructions for connecting the DC power input to the inverter.
Describes how to connect optional remote control and alarm interfaces.
Details how to connect the alarm relay for remote monitoring.
Introduces the operational procedures and features of the inverter.
Lists essential checks to perform before powering on the inverter.
Step-by-step guide on safely applying power to the inverter and checking its status.
Explains how to operate the inverter remotely using switches or relays.
Describes the main menu structure displayed on the inverter's LCD screen.
Details the inverter's status parameters available in the Status Menu.
Explains how to access and configure inverter settings via the Settings Menu.
Introduces the maintenance procedures and safety precautions for the inverter.
Provides guidance on diagnosing and resolving common inverter problems.
Explains the meaning of different LED indicator states and their priority.
Lists and describes various alarm codes, their levels, and associated inverter status.
To Next Page