Eaton Sefelec MXS500 - User Manual

SEFELEC REFERENCE PENT0438
Operating manual XS SERIES - English

Eaton Sefelec MXS500 Specifications

General

Brand	Eaton
Model	Sefelec MXS500
Category	Test Equipment
Language	English

Summary

Warranty

Specifications

1 DIELECTRIC STRENGTH TEST 50 VA (Hipot 50 VA Test)

Output Voltage and Breakdown Detection

3 Megohmmeter Function (Insulation Resistance)

500 V Megohmmeter Function and Settings

Describes 500V megohmmeter capabilities, including voltage, range, threshold, and timer settings.

4 Ground Continuity Function

Current, Voltage, and Threshold Selection

Details current selection, open circuit voltage, and resistance threshold settings for continuity tests.

Installation and Safety

Preliminary Instructions and Power ON

Provides pre-installation steps, safety precautions, and power-on procedures.

6 Unit Configuration

7 Insulation Resistance Measurement

Parameter Setting, Voltage, and Timer

Guides through setting insulation test parameters including voltage, thresholds, and timer functions.

8 Dielectric Strength Test (Hipot Test)

Setting, Voltage, and Breakdown Detection

Covers Hipot test settings, voltage selection, and breakdown detection modes with threshold adjustments.

10 Sequence Mode Operation (SXS)

Sequence Setting and Control

Dielectric Strength Tests

Voltage Selection and AC;DC Characteristics

Ground Continuity Measurement

Current, Voltage, Test Time, and Precautions

14 Safety Interlock Connector (C5)

Connecting Lamps and Contacts

Explains how to connect safety interlock contacts, PASS/FAIL indicators, and lamps.

16 Maintenance and Calibration

Maintenance Procedures and Calibration

HV Sensor Connection Recommendations