The function displays the faults that are present in the system. When the function is
activated, SYSTEM and PROG LEDs are flashing slowly and all faults that are
currently present in the system are displayed. Led 1 – 8 display information on the
cause of fault. To clear the faults memory, press . To exit without clearing the
faults memory, press .
Faults description:
1 –
Sabotage of zones
To display more detailed information about sabotage of zones, press
button.
1 – Sabotage of zone 1
2 – Sabotage of zone 2
7 – Sabotage of zone 7
To return to the main fault menu, press .
2 –
Fault of outputs 1 - 3
To display more detailed information about fault of outputs, press
button.
1 – Fault of output 1
2 – Fault of output 2
3 – Fault of output 3
To return to the main fault menu, press .
3 –
Fault of feeding outputs
To display more detailed information about fault of feeding outputs, press
button.
1 – Fault of feeding output + KP
2 – Fault of feeding output +AUX1
3 – Fault of feeding output +AUX2
To return to the main fault menu, press .
4 –
AC fault
No more detailed information.
5 –
Battery fault
No more detailed information.
6 –
ATS fault
No more detailed information.
To Next Page
Loading...
