EBS CPX200NB - Testing System Zones

CPX200NB ALARM CONTROL UNIT – USER MANUAL 19 / 30
EN
<User code > <Code> <Code>
where:
User code – Code of a user changing the password
Code – New access code (from 4 to 7 digits)
In any moment you can press to exit without saving changes.
7.7. PROGRAMMING TIME
You can change system time here. Time can be changed by the administrator only.
3 beeps will confirm the successfully entered function. Default admin code: 1111.
< Administrator code > <hh> <mm>
where:
Administrator code – Administrator code.
hh – Hours.
mm – Minutes.
In any moment you can press to exit without saving changes.
7.8. PROGRAMMING DATE
You can change system date here. Date can be changed by the administrator only.
3 beeps will confirm the successfully entered function. Default admin code: 1111.
< Administrator code > <YY> <MM> DD>
where:
Administrator code – Administrator Code.
YY – Year.
MM – Month.
DD – Day.
In any moment you can press to exit without saving changes.
7.9. TESTING THE ZONES
The function allow user to test zones and detectors connected to zones input.
<User code> <Duration of test>