Chengdu Ebyte Electronic Technology Co.,Ltd. E90-DTU(xxxSLxx-ETH)_V2.0 User Manual
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
11
2.5 TCP servers instructions
Configure the Ethernet parameters of the "Gateway Radio", using the host computer and the web
configuration as follows:
NetAssist connects to the "Gateway Radio" as shown below (the device LINK indicator is always on after
successful connection, if it is connected but the indicator is not on, the device is in configuration mode and can be
lifted by rebooting the device (power off, and then power on the device)), XCOM connects to the "Serial Radio":
To Next Page
Loading...
