Ebyte E90-DTU

Chengdu Ebyte Electronic Technology Co.,Ltd. E90-DTU(xxxSLxx-ETH)_V2.0 User Manual
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
7
Transmission Mode Configuration Mode
Step 3: Open the configuration software for "E9x-DTU(xxxSLxx)" and select the corresponding serial port;
Step 4: "Open serial port" and click "Get" to read parameters, then click "Param Reset" to restore factory
settings;
Step 5: Configure the baud rate to 9600, parity to 8N1, null speed to 2.4Kbps, packet length to 240Bytes, etc.,
as shown in the figure below, click "Set Param";