ECD OvenRIDER NL2+ - OPERATION; STEP 1: SETUP INSTRUMENT

④
③
14
OPERATION SETUP INSTRUMENT
STEP 1: SETUP INSTRUMENT
1. Open the M.O.L.E.® MAP soware.
2. Connect the M.O.L.E.® Thermal Proler to the
computer.
3. Make sure the M.O.L.E.® Power Pack baery is fully
charged. When a M.O.L.E.® Thermal Proler is se-
lected, the soware status bar displays the current
baery voltage.
4. Set an OvenRIDER® NL 2+ Environment. Either
open an exisng Environment Folder or create a
new one.