Need help?Do you have a question about the ECD 100-181 and is the answer not in the manual?
General| Brand | ECD |
|---|---|
| Model | 100-181 |
| Category | Controller |
| Language | English |
This manual serves as the ECD System Manual for the 100-181 controller.
Covers safety principles and obligations for personnel, including operating instructions.
Details equipment hazards, power risks, and controller installation conditions.
Outlines terms for warranty claims, installer responsibilities, and equipment usage.
Explains the purpose and basic operation of EEPROM settings for lift configuration.
Describes how to access, change, and secure EEPROM parameters via the LCD interface.
Provides a detailed list and description of various EEPROM settings and their values.
Details wiring and serial communication protocols for multi-lift groups.
Explains how to verify group communication and identify common system faults.
Describes inputs/outputs related to door operation, timing, safety, and zones.
Covers inputs/outputs for fire recall, inspection, and independent service modes.
Details inputs/outputs for leveling, locks, nudging, and position indication.
Explains how to read and interpret information displayed on the LCD screen.
Details the information shown on the LCD status line and mode indicators.
Describes door mode indicators and control buttons used for lift operation.
Explains how different drive settings affect the controller's output signals.
Details magnet counting, pulse counting, and speed calculation logic for lift movement.
Covers software updates and troubleshooting group communication issues.
Addresses issues like leveling failures, protection timers, and door operation problems.
Discusses fuse issues, power tests, lift step problems, and processor errors.
Information required when contacting for service or discussing modifications.
To Next Page
