Echo 9 Ultra H2 User Manual

28
How to Use Acidic Water
H 2 WATER
1
2
3
4
Alkaline Water
Acidic Water
NOTE : Acidic water is used for cleaning and sterilization.
Drink in small amounts (1 to 2 ounces) case of food poisoning or severe
abdominal cramps
Press the power button on the faucet to turn the machine on.
Press the "ACIDIC" button to select the desired setting.
The display panel will show an Orange LEDs corresponding to the level selected.
The Acidic water will now come out from the top spout.
To select a different level, press the "ACIDIC" button to move to the next level until
the desired setting level is achieved. The Orange LEDs will change accordingly.
NOTE : Your machine will always "remember" the last setting used.
If the previous selection was Acidic Level 2, when you start flow through
the machine, it will automatically produce Acidic Level 2.
To select Acidic water
Level 1 Level 2 Level 3 Level 4

Echo 9 Ultra H2 Specifications

General

Brand	Echo
Model	9 Ultra H2
Category	Water Filtration Systems
Language	English