Echo CS-2511T User Manual

CS-2511T OPERATION
X7503332503 31
© 11/19 ECHO Incorporated
◆ After choke control knob is rotated and then knob is
returned to original position, throttle remains slightly open
(fast idle latch condition).
◆ The chain will attempt to move when engine is started with
fast idle throttle latch engaged.
◆ Do not start engine unless chain brake is locked.
◆ After starting the engine, immediately squeeze and then
release throttle trigger to release fast idle throttle latch,
otherwise severe brake damage may occur.
◆ Never use fast idle throttle latch for cutting.
◆ Use the fast idle throttle latch only in starting.
◆ Do not increase engine speed when chain brake is locked.
Severe brake damage can occur.
7. Securely hold the chain saw and
pull starter handle several times
until first starting sound.
8. Turn choke control knob
clockwise to (OPEN choke
position).
9. Pull starter handle to start the
engine.
10. When engine starts, immediately
squeeze and release throttle
trigger to release fast idle throttle
latch.
Shown with optional
Kick Guard
TM
Chain Brake LOCKED
Throttle Trigger

Echo CS-2511T Specifications

General

Engine Displacement	25.0 cc
Fuel Tank Capacity	190 ml
Oil Tank Capacity	140 ml
Weight (without bar and chain)	2.3 kg
Chain Pitch	3/8 in
Chain Gauge	0.050 in
Bar Length	12 in
Fuel Capacity	190 ml
Oil Capacity	140 ml
Guide Bar Length	12 in