Echo CS-2511T User Manual

OPERATION CS-2511T
32 X7503332503
© 11/19 ECHO Incorporated
Note: Do not pull starter rope out to maximum position. Do not allow
recoil handle to snap back against the casing. If engine does
not start after 5 pulls, repeat instructions.
Starting Warm Engine
Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain brake
before starting.
2. Confirm there is fuel and chain
oil in the tanks.
3. Move ignition switch forward to
“RUN” position.
4. Securely hold the chain saw as
shown and pull starter handle.
Chain Brake LOCKED
Shown with optional
Kick Guard
TM
START / RUN
Ignition Switch
Shown with optional
Kick Guard
TM
Chain Brake LOCKED

Echo CS-2511T Specifications

General

Engine Displacement	25.0 cc
Fuel Tank Capacity	190 ml
Oil Tank Capacity	140 ml
Weight (without bar and chain)	2.3 kg
Chain Pitch	3/8 in
Chain Gauge	0.050 in
Bar Length	12 in
Fuel Capacity	190 ml
Oil Capacity	140 ml
Guide Bar Length	12 in