Echo CS-271T - Page 44

CHAIN BRAKE SYSTEM
CS-271T
42
6-3Assemblingbrakelever
1. Install torsion spring (A) setting shorter end (a1)
in the groove (B) of sprocket guard as shown.
2. Set brake lever (C) on sprocket guard, installing
torsion spring longer end (a2) inside brake lever by
bending with driver etc.
3. Install collar (D) on brake lever, setting at sides
(d) as shown.
4. Install nut (E) in collar (D), facing at side (e) to
collar (D).
5. Set spacer (F) on bolt (G) and assemble brake
cover on sprocket guard.
A
d
E
C
D
B
e
G
F
a1
a2
a2
d