Echo CS-271T - Saw Chain Lubrication System

SAW CHAIN LUBRICATION SYSTEM
CS-271T
43
7-1 Inspectingoilcapandstrainer
1. Remove oil cap.
2. Inspect oil cap for cracks and O-ring (A) for cuts
or damage. Replace worn or damaged parts as re-
quired.
3. Pull oil strainer (B) from oil tank using a wire
hook (C).
4. Remove oil strainer (B) from oil line (D) and
clean oil strainer in suitable solvent, or replace if
damaged.
7 SAW CHAIN LUBRICATION SYSTEM
( A ) Oil cap
( B ) O-ring
( C ) Connector
( D ) O-ring
( E ) Oil tank vent
( F ) Engine cover
( f ) Oil tank
( G ) Oil strainer
( H ) Grommet
( J ) Oil line
( K ) Auto-oiler assembly
( L ) Oil outlet line
( M) Pipe joint
(A)
(B)
(F)
(C)
(D)
(E)
(G)
(H)
(K)
(J)
(L)
A
B
C
D
B
(M)