Echo DSRM-2100 User Manual

DSRM-2100
9992220572326
© 08/2021 ECHO Incorporated
TROUBLE SHOOTING
TROUBLE SHOOTING
Problem Possible Cause Solution
The machine
does not
start when
you push
the trigger
switch.
No electrical contact
between the machine
and the battery.
1. Remove battery.
2. Check contact and install the battery
again.
The battery is depleted. Charge the battery.
The lock-out lever and
trigger switch are not
pushed at the same
time.
1. Push the lock-out lever and hold it.
2. Pull the trigger switch to start the
machine.
The machine
stops when
you cut.
The debris shield is
not attached to the
machine.
Remove the battery and attach the
debris shield to the machine.
Heavy cutting line is
used.
Use only with the nylon cutting line of
0.095" diameter line or smaller.
The grass winds around
the motor shaft or the
trimmer head.
1. Stop the machine.
2. Remove the battery.
3. Remove the grass from the motor
shaft and trimmer head.
The motor is overload-
ed.
1. Remove the trimmer head from the
grass.
2. The motor will recover to work as
soon as the load is removed.
3. When you cut, move the trimmer
head in and out of the grass to be cut
and remove no more than 8" in pass.
The battery or machine
is too hot.
1. Cool the battery until its function
returns to normal.
2. Cool the machine for approximately
10 minutes.
The battery is
disconnected from the
tool.
Install the battery again.
The battery is depleted. Charge the battery.

Echo DSRM-2100 Specifications

General

Brand	Echo
Model	DSRM-2100
Category	Trimmer
Language	English