Echo HSD 600 Profi - Introducing the Hedgetrimmer; General Safety Instructions

GB-1
ENGLISH
Hedge Trimmer
2. General safety instructions
Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the
local regulations when operating your device.
Usage of hedge trimmer always involves a risk of
accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless, use
of the machine can involve risks to the user or third
persons, and can cause damage to the machine or
other objects.
Attention: Using electric power tools, you must observe
following fundamental safety instructions to protect
yourself against electric shock, against danger of injuries
and danger of re. Read all these instructions before
using the hedge trimmer and observe them. Keep these
safety instructions at a safe place.
Use the machine in a safety conscious manner for
suitable applications in a technically perfect condition
only and with due regard to the operating instructions!
Immediately rectify or have rectied any faults which
could adversely affect safety!
1. Introducing the hedgetrimmer
Technical data HSD 600 Pro (HCR 610)
Operating Voltage V~ 230
Nominal Frequency Hz 50
Nominal Consumption W 700
Cutting movements min
-1
2400
Shear length mm 600
Cutting Thickness mm 29
Weight (without ex) kg 4,2
Noise Pressure Level L
pA
according to EN 60745 dB (A) 85 [K=3,0 dB(A)]
Vibration according to EN 60745
m/s
2
<2,5 [K=1,5 m/s
2
]
We reserve the right to make changes to the technical specications.
Class of protection: II/DIN EN 60745/VDE 0740
Interference suppressed in accordance with EN EN 55014, EN 61000-3-2:1995, 61000-3-3:1995.
The devices are manufactured in accordance with the provisions of DIN-EN 60745-1and DIN-EN 60745-2-15 and fully
comply with the provisions of the German Product Safety Act.
Emissions
- The specied vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specied vibration emission value can also be necessary for the assessment of work breaks are used.
- The specied vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
Translation of the original Operating Instructions