99944200475 MAINTENANCE
© 4/2015 ECHO Inc.
X7702093705 15
MAINTENANCE
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and
hot surfaces.
Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance
will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may
want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is
not listed, see your ECHO Dealer for repairs.
Skill Levels
Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
ECHO offers REPOWER
TM
Maintenance Kits and Parts to make your maintenance job easier.
Maintenance Intervals
IMPORTANT - Time intervals shown are maximum. Actual use and your experience will determine the
frequency of required maintenance.
(1) Apply lithium based grease.
Blade Replacement/Lubrication
Level 1.
Gear Case
Note: Grease gear case every 15 - 25 hours of use. Replace
blade when it is worn shorter than 6 in. Remove blade and holders before greasing to prevent
damage to gear and bearings.
1. Shut engine off.
2. Remove split pin (A).
Component/System Maintenance Procedure
Skill
Level
Interval
Drive Shaft Grease 1 Every 25 hours of use [1]
Gear Housing Grease 1 Every15 - 25 hours of use [1]
Screws/Nuts/Bolts Inspect/Tighten/Replace 1 Before Each Use
Parts Required:
POWER BLENDX
TM
8 oz. or Lithium Base
Grease, Blade, new split pin
To Next Page
Loading...
