15
Before you start
1. Stand in a comfortable operating position with attachment
assembled, and position front handle for comfortable opera-
tion. Tighten handle screws.
Barrier bar assembly
1. Unscrew bottom bracket of handle, and replace with Barrier
Bar as shown. Adjust handle and secure as described
above.
NOTE
The barrier bar may be used with the PAS attachments indicat-
ed in the barrier bar table.
BARRIER BAR USE - PAS ATTACHMENTS
PAS ATTACHMENT RECOMMENDED OPTIONAL NOT RECOMMENDED
Shaft Hedge Clipper •
Tiller-Cultivator •
Power Pruner •
Standard Line Trimmer •
Pro Sweep •
Pro Thatch •1
Articulating Hedge Clipper •
Brushcutter •2
Rapid Loader Line Trimmer •
Pro Paddle •
Power Blower •
1. Use J-Handle provided with Pro-Thatch attachment as a barrier.
2. Brushcutter requires U-Handle & Harness.
To Next Page
Loading...
Need help?
General