Echo PE-2000 1 User Manual

18
If engine does not stop, close choke to stall engine. Have your
ECHO Dealer inspect and repair stop switch before using edger
again or serious personal injury may result.
STOPPING ENGINE
1. Release throttle trigger and allow engine to idle.
2. Place stop switch in STOP position.
WARNING DANGER
PE-2000
PE-2400
PE-3100
STOP
STOP
OPERATING TECHNIQUES
1. Before edging, water the area to soften the ground to make edging
easier.
2 Before edging, check the area and remove all obstacles and objects
that could be thrown.
3. Plan to edge regularly to make it easier to keep a neat edge and to
avoid having to make more than one pass.
NOTE
Blade depth may have to be adjusted due to differences in height
between the hard surface and the top of the grass.
WARNING DANGER
Never adjust blade height with engine running, otherwise serious
personal injury may result.
4. Adjust the blade's depth of cut to produce a fine cut between
sidewalk and grass using a minimum blade depth, usually with
about 1/2" of the blade into the ground.
WHEEL
WING
NUT
DECREASE
DEPTH
INCREASE
DEPTH
1/2"

Echo PE-2000 1 Specifications

General

Brand	Echo
Model	PE-2000 1
Category	Edger
Language	English