ASSEMBLY SHC-225/S
16 X7502257007
© 4/2016 ECHO Inc.
ASSEMBLY
Support Handle
Note: Label shows minimum
spacing for support handle
location
1. Position support handle in
comfortable operating position
and tighten screws.
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep
hands, clothing and loose objects away from all openings. Always
stop engine, disconnect spark plug, and make sure all moving
parts have come to a complete stop before removing obstructions,
clearing debris, or servicing unit.
Operation of this equipment may create sparks that can start fires
around dry vegitation.This unit is equipped with a spark arrestor to
prevent discharge of hot particles from the engine. Metal cutters
can also create sparks if the cutter strikes rocks, metal, or other
hard objects. Contact local fire authorities for laws or regulations
regarding fire prevention requirements.
To Next Page
Loading...
Need help?
General
