Echo SRM-225 User Manual

X7722279402 21
© 2/2016 ECHO Inc.
SRM-225 OPERATION
Operation of this equipment may create sparks that can start
fires around dry vegitation.This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the
engine. Metal cutters can also create sparks if the cutter
strikes rocks, metal, or other hard objects. Contact local fire
authorities for laws or regulations regarding fire prevention
requirements
.
Operation With Blades
Blade use DEMANDS specific Brush Cutter configuration.
Operation without specified shield, barrier bar or U-handle, and
harness can result in serious personal injury. Follow installation
instructions.
DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL
TRIMMERS.
• Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.
• New cotter pin required each time blade is installed.
PARTS REQUIRED FOR THESE BLADES:
Pro Maxi-Cut
Grass/Weed
Blade
Rigid Plastic
Tri-Cut
Grass/Weed Blade
Metal Blade
Support Handle, w/or
w/o Barrier Bar
U-Handle or Support
Handle
w/Barrier Bar
U-Handle or Support
Handle
w/Barrier Bar
Shield w/cutoff knife Shield w/cutoff knife Shield w/o cutoff knife
Harness Harness Harness
Upper Plate &
Flat Washer
Upper Plate
& Glide Cup
Upper/Lower
Blade Plates
Hex Nut Hex Nut Hex Nut
New Cotter Pin New Cotter Pin New Cotter Pin

Echo SRM-225 Specifications

General

Engine Displacement	21.2 cc
Cutting Swath	17 inches
Engine Type	2-stroke
Carburetor	Diaphragm
Shaft Type	Straight
Fuel Capacity	14.9 fl. oz
Fuel Tank Capacity	14.9 fl. oz
Warranty	5 year consumer / 2 year commercial