EchoStar AD-3600 IP Viaccess - Page 40

Section 5 Operation
Page 5 - 2 EchoStar AD-3600IP Viaccess
© 2001 EchoStar International Corporation
All rights reserved
1.3. TO SELECT A LIST
1.4. TO GROUP A LIST
1.5. TO SORT A LIST
1. On the RCU, press the OK key.
2. Select the required mode.
3. On the RCU press the GREEN key.
4. Read the available help text for information.
5. Select the required list.
1. On the RCU, press the OK key.
2. Select the required mode.
3. On the RCU press the YELLOW key.
4. Read the available help text for information.
5. Select the required group option.
1. On the RCU, press the OK key.
2. Select the required mode.
3. On the RCU press the BLUE key.
4. Read the available help text for information.
5. Select the required sort option.
Note that only for the Character and Word option
a keyboard appears.
6. When the keyboard appears:
a. use the arrow keys to navigate;
b. press OK to accept the character;
c. select the button to get lower case
characters and numbers;
d. select the button
e. on the RCU, press the OK key to confirm.