EchoStar AD-3600 IP Viaccess - Page 41

Operation Section 5
Digital Satellite Receiver Page5-3
© 2001 EchoStar International Corporation
All rights reserved
5
1.6. TO EDIT A LIST
1.6.1. TO MOVE A CHANNEL
1. On the RCU, press the OK key.
2. Select the required list.
3. On the RCU press the WHITE key.
4. Read the available help text for information.
5. Select the required edit option.
NOTE
Some EDIT options are not always available.
If an option is not presented, select Group - None and Sort - None
1. In the Edit menu, select the Move option.
2. Read the available help text for information.
3. Go to the channel you want to move.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection.
5. If you want to undo the selection, press the
OK key again.
6. Move the channel, either:
a. use the keys;
b. use the page + / - keys;
7. On the RCU, press the OK key to confirm.
8. Either:
a. press the WHITE key to end the session, or
b. select the next channel you want to move.