Eclipse AVN2454 User Manual

Be sure to read this installation manual thoroughly before carrying out installation and making
connections. If installation methods or non-standard parts that are not specified in this installation
manual are used, accidents or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for
later reference.
To dealers:
Give this installation manual to the customer after installation and connections have been completed.
Contents
Contents
Components
Installation Diagram
Before
installation
Installation
Connections
2
For your safety in using the AVN2454 3
5
Names and functions of terminals 6
Installing the GPS antenna
Installing the main unit
13
16
6.5" Wide TFT Touch-Panel Display CD / DVD Multi-Source Receiver with DVD NAVIGATION
INSTALLATION MANUAL
Connecting the vehicle speed pulse signal, parking brake signal cable and reverse cable
9
System connection example 12
by FUJITSU TEN
MODEL

Eclipse AVN2454 Specifications

General

Brand	Eclipse
Model	AVN2454
Category	Car Receiver
Language	English

Summary

Components

Main Unit Components

Lists and illustrates the primary components included with the main unit.

GPS Antenna Components

Lists and illustrates the components specifically for the GPS antenna.

Wiring Components

Lists and illustrates the various wiring and cable management accessories.

Safety Information

Warnings and Cautions

Crucial safety information, warnings, and cautions for product installation and use.

Installation Diagram

Connections

Terminal Identification

Explains the purpose and connections of various terminals on the unit.

Cable Wire Colors & Points

Details wire colors and connection points for interconnecting cables ②, ③, and ④.

Main Unit & Vehicle Connections

Describes main unit connection ports and vehicle interface adapter cables.

Vehicle Signal Wiring

Vehicle Speed Pulse Signal

Details connecting the vehicle speed pulse signal cable using a splicing connector.

Parking Brake Signal

Illustrates how to connect the parking brake signal cable.

Reverse Signal Cable

Illustrates how to connect the reverse signal cable.

Using the Splicing Connector

Step-by-step guide on how to use the splicing connector for wiring.

System Connection Example

Installing the GPS Antenna

Installation Inside Vehicle

Provides an example of how to install the GPS antenna inside the vehicle.

Installation Outside Vehicle

Provides an example of how to install the GPS antenna outside the vehicle.

Installing the Main Unit

Installation Angle

Specifies the maximum allowable mounting angle for proper unit function.

Mounting the Main Unit

Step-by-step example for physically mounting the main unit in the vehicle.