How to operate the Area Shot function (U.S.A./CANADA only)
35
VII
Map data
The map data used by the main unit was created based on information provided by NAVTEQ
TM
.
When using the map data, be aware of actual road conditions and obey traffic rules.
Copying, publishing or using maps in electronic media without express written consent is forbidden.
User Registration Key display
User Registration Key is your CD3100's unique ID. In order to use the ECLIPSE web site (E-iSERV), a
16-digit User Registration Key is necessary.
The 16 digits of your User Registration Key will be displayed.
Pressing the [SCREEN] button will display the first 8 digits. Pressing the [SCREEN]
button again will display the latter 8 digits.
ATTENTION
Your User Registration Key is a 16-digit ID composed of numbers 0-9 and letters A-F.
WARNING
• Make sure to follow the actual traffic regulations when driving.
• During your vehicle while only following guidance point instructions may lead to traffic violations
and cause accidents.
• Do not modify this system for use other than that specified herein. Also, do not deviate from the
installation procedures described herein, ECLIPSE will not be held liable for damages including,
but not limited to serious injury, death or property damage resulting from installations that enable
unintended operation.
1
Check that the main unit is in standby mode.
2
Press the [SCREEN] button.
To Next Page
Loading...
Need help?
General
