48
About optional unit
How to operate the main unit with an optional
CD changer connected
This section covers the operation of an optional
CD changer that is connected to the main unit.
Listening to a CD
For details, refer to "Switching Audio
Modes" on page 15.
Advancing to the next track or
returning to the beginning of
the track being played
Right: Advances to the next track.
Left:
Returns to the beginning of the
track being played.
(Repeat pressing for previous
tracks.)
Operations during rotary mode
Turn to the right:
Advances to the next track.
Turn to the left:
Return to the beginning of the track
being played.
Repeat turning for previous tracks.
Fast Forward/Rewind
Fast forward or rewind the song currently being
played.
Right: Fast forward.
Left: Rewind.
Playing the beginning of tracks
(SCAN)
Pressing the button for less than one
second causes the changer to move
up to the next track and play it for 10
seconds, then move up to the next
track and play it for 10 seconds, and
so on, on one CD, until the button is
pressed again.
Press the button for longer than a
second to play the first 10 seconds of
the first track of every CD loaded.
ATTENTION
• To continue playing a desired track, press
the button again to stop scanning.
• After the entire disc is scanned once,
ordinary playback starts from the point
where scanning started.
1
Switch to CD changer mode.
1
Press the [SELECT] (Right/Left)
button for less than one second.
1
Turn the [VOL] button.
1
Press and hold the [SELECT]
(Right/Left) button.
1
Press the [4 SCAN] button.
To Next Page
Loading...
Need help?
General
