50
About optional unit
How to operate the tuner with an optional HD
Radio tuner connected (U.S.A. only)
About HD Radio
If the optional HD Radio (High Definition Radio)
tuner unit is connected, terrestrial digital
broadcasts can be received. When terrestrial
digital broadcasts are received, FM reception has
the same quality as a CD, and AM reception has
the same quality as conventional FM sound.
Depending on the reception status, HD Radio
can also receive analog broadcasts, which
means reception is still possible in regions with
no digital coverage.
There are automatic and manual methods for
setting stations in memory. The main unit will
accept up to 24 stations in memory: 6 in AM and
18 in FM (6 each for FM1, FM2 and FM3.) (Initial
setting)
See "How to operate the tuner" on page 29 for
information on the following operations:
• Listening to the tuner
• Tuning to a station
• Entering stations into memory automatically
(The automatic preset mode: ASM)
• Manually setting station into memory
• Preset station scan
During digital reception, [HD] is shown on the
display.
Switching between displays
when receiving HD Radio
During digital reception, the name of the station
being received and other information can be
displayed.
Each press will switch the display
items in the following sequence:
station name
→ title* → artist* →
album* → genre.
*: Depending on the nature of the
broadcast, no information may be shown.
HD Radio reception settings
The HD Radio reception method can be
selected. When the HD Radio tuner is connected
to this main unit for the first time, it will be set at
[AUTO] (automatic digital/analog selection).
The Menu selection mode is activated.
The function mode is activated.
Displays the reception setting screen.
In the [Auto] setting, the selection is
switched between digital and analog
reception automatically. In areas
where digital reception is not possible,
reception is automatically switched to
analog to avoid loss of reception.
During digital reception, [HD] is shown
on the display. This is cleared during
analog reception.
In the [OFF] setting, reception is
always analog.
1
Press the [SCREEN] button for
more than one second.
1
Press the [EQ/MENU] button for
more than one second.
2
Press the [SELECT] (Upper/Lower)
button to select FUNCTION then
press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select HD Radio.
4
Press the [ENTER] button.
5
Press the [SELECT] (Upper/Lower)
button to select Auto or OFF.
6
Press the [ENTER] button.
7
Press the [EQ/MENU] or [RTN]
button to exit function mode.
To Next Page
Loading...
Need help?
General
