Ecobee Smart Si - Alerts

Lamp Change date, turn the Reminder On or
O, and set the Frequency of the maintenance
interval.
Alerts
The Smart Si thermostat can generate alerts if
the temperature in the home goes over or under
a pre-programmed level. This protects the home
from damage due to freezing and/or excessive
heat.
This alert, along with optional technician contact
information, will be displayed on the screen. If
the homeowner registers the thermostat, the
alert will be emailed to them and be displayed
on the web portal.
Low Temp Alert Sets the temperature at which
the thermostat will generate a Low Temperature
Alert. The range can be:
O – no alert will be generated.
Set temperature range of 35 to 68 °F (1.5 to
20 °C).
High Temp Alert Sets the temperature at which
the thermostat will generate a High Temperature
Alert. The range can be:
O – no alert will be generated.
Set temperature range of 60 to 104 °F (15.5
to 40 °C).
Display Alerts on Thermostat
Select No if you do not want any of the alerts to
be displayed on the Smart Si thermostat screen.
Alerts will continue to be displayed on the web
portal and sent via email.
33