Before You Begin
This product is intended to be installed by
trained service professionals.
This manual explains the procedures for
installing the ecobee Smart Si thermostat.
Please read it carefully before beginning the
installation.
For information on how to operate the ecobee
Smart Si thermostat, please see the Smart Si
Thermostat User Manual.
The Smart Si thermostat is designed to be
mounted on the homeowner’s wall in a
convenient location.
Caution: Disconnect electric power to the HVAC
system before installing this product. Failure
to do so could result in electric shock and/or
equipment damage.
All wiring must conform to your local electrical
code.
Mercury Notice: This product does not contain
mercury. If you are replacing a product that
does contain mercury, contact your local
waste-management authority for disposal
instructions. Do not discard the old product in
the regular trash.
ecobee
OK
MENU BACK
!
2
To Next Page
Loading...
