|25
To test the go off-grid feature, you can toggle the button
to switch the connection status of the system.
7
If this feature is enabled, the system will optimize solar
generation in shaded conditions at your setup intervals
to track the maximum power point. Solar generation
may fluctuate.
(Optional) Tap "Add Device" to integrate devices into
this system, such as SG READY certified Heat Pump or
charging pile etc., and setup relevant parameters.
8
Click for a home owner access QR
code to allow users to scan it.
6
•
After manually adding device
using the EcoFlow User App, users scan the home
owner access QR code to bind it.
To Next Page
Loading...