EcoFlow RIVER 3 - Control Via Phone; Explore more; X-Boost: Powering High-Wattage Appliances

Tip:
Unable to discover this power station via Bluetooth? Try the following:
a. Power-off: Press and hold the main power button for about 3
seconds to turn off the power station.
b. Reset Bluetooth: While the power station is turned off, press and
hold the main power button until the screen displays power-on
animation twice to reset all Bluetooth and Wi-Fi connections.
c. Power on & Retry: Press the main power button to turn on the
power station, and start searching again.
Control via Phone
With the EcoFlow app, you can manage all your EcoFlow binding devices on
your phone.
The power station supports Wi-Fi and Bluetooth connections, adapting to
varying network conditions to ensure convenient access to device settings.
With Internet
When Wi-Fi is stable, you can access the device settings via the internet. This
method is always recommended to ensure your EcoFlow device can receive
timely firmware updates and pushes.
Without Internet
If the Wi-Fi connection is limited, you can manage the power station locally via
Bluetooth.
Explore More
X-Boost: Powering High-Wattage Appliances
The power station's AC output sockets support X-Boost. They can power
devices rated at up to 600W (450W for the JP version) without incurring
operation failure caused by overload protection.
How do I use this feature?
X-Boost is enabled by default. Connect any high-wattage appliance to an
AC output socket on the power station to use this feature.
You can enable/disable X-Boost in the EcoFlow app.
X-Boost is unavailable when the power station is in bypass mode*.
*Bypass mode: When the power station is connected to the grid power
through its AC input port and to devices via its AC output sockets, the devices
will receive AC power directly from the grid instead of from the power station.
What kind of devices does X-Boost support?
X-Boost is suitable for heating and motor-driven devices. It does not support
devices with voltage protection (such as precise instruments). Conduct your
own tests to check whether your devices support X-Boost.