EcoFlow Smart Generator User Manual

16
4. Reinstall the fuel
cap.
3. Wipe the filter screen and
place it back into the fuel.
2. Clean the fuel filter
screen with fuel.
1. Take off the fuel cap
and fuel filter screen.
Once the generator starts running, the engine and the muffler will become scalding hot. Do not let
your skin or clothes directly touch the engine or muffler during your checks and maintenance.
Be sure to tighten the fuel cap.
1. Unscrew the bolts.
2. Take off the muffler cap, muffler block and spark plug
arrestor.
3. Clean the carbon deposits on the muffler block and the
spark plug arrestor gently with a steel wire brush to avoid
any damage or scratchesto the muffler block and spark
plug collector.
4. Check whether the muffler block or the spark plug arrestor
is damaged,and replace it if damaged.
5. Reinstall the parts in turn.
3.5 Fuel Filter Strainer
3.6 Muffler
Caution
Warning
Warning
Never use fuel in any place near smoke or flames.
Clean any carbon deposits

EcoFlow Smart Generator Specifications

General

Fuel type	Liquefied Petroleum Gas (LPG), Petrol
Noise level	67 dB
Rated power	1800 W
Cooling type	Air
Maximum power	1900 W
Rated voltage	230 V
Ignition system	Manual/Electronic
Rated frequency	50 Hz
Fuel consumption	- l/h
Fuel tank capacity	4 L
AC outlets quantity	1 AC outlet(s)
Number of cylinders	1
Engine number of strokes	4
Continuous operating time @ maximum power @ rated voltage	3.5 h
Castor wheels	No
Product color	Black
Oil tank capacity	0.38 L
Carrying handle(s)	Yes

Weight and Dimensions

Depth	597 mm
Width	300 mm
Height	475 mm
Weight	30500 g