EcoFlow Smart Generator User Manual

5
2.2 Introduction to the Icons on the Display Screen
Remaining Power Percentage: If the remaining fuel level is lower than 600 mL/20.3 oz., the indicator
will be at 0% charge and flash to warn you.
Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen
which indicates that the product is ready for pairing. There’re two ways to connect the product with
the App, either directly connect to the product’s hotspot or using the Internet. If the App is successfully
connected to the product’s hotspot, the icon will keep flashing; if it is successfully connected to the
Internet, the icon will stay on.
* See Section 5 for more troubleshooting steps.
Error Code: Please refer to the EcoFlow app for specific information on error codes.
ECO Mode: In ECO mode, the Smart Generator will adjust its rotational speed to match the output
power demand, in order to conserve fuel and reduce noise. This is the default mode. You can modify the
mode settings in the EcoFlow app. For details please refer to 2.4.5.
ECO
Wi-Fi Status
Total Run Time
Remaining Power Percentage
Eco Mode
AC Output DC Output
Output Overload Alert
Communication Connection
Output Power
Rechargeable
Battery Fault Alert
Error Code
Carbon Monoxide
Alert
Low Temperature Alert
High-Temperature Alert
Remaining Running Time

EcoFlow Smart Generator Specifications

General

Fuel type	Liquefied Petroleum Gas (LPG), Petrol
Noise level	67 dB
Rated power	1800 W
Cooling type	Air
Maximum power	1900 W
Rated voltage	230 V
Ignition system	Manual/Electronic
Rated frequency	50 Hz
Fuel consumption	- l/h
Fuel tank capacity	4 L
AC outlets quantity	1 AC outlet(s)
Number of cylinders	1
Engine number of strokes	4
Continuous operating time @ maximum power @ rated voltage	3.5 h
Castor wheels	No
Product color	Black
Oil tank capacity	0.38 L
Carrying handle(s)	Yes

Weight and Dimensions

Depth	597 mm
Width	300 mm
Height	475 mm
Weight	30500 g