EcoFlow Wave 2 User Manual

17
Care and Maintenance
1. Please close the socket cover after the unit is stored to prevent dust.
2. After the unit is stored after shutdown, it is required to manually drain the damp inside
the unit to prevent breeding of bacteria in the damp during long-term storage and avoid
overow of water when it is moved next time.
3. It is recommended to store this product within the range of ambient temperature from 20°C
to 30°C, and keep this product away from water sources, heat sources, and metal objects.
The fan is not
running
There are fan-related errors;
Check whether there are indications of error
codes, clear them and retry;
The compressor
is not running
There are compressor-related
errors;
Check whether there are indications of error
codes, clear them and retry;
Water
overows from
the bottom case
①
Tilt angle is too large;
②
The ow passage inside
the conditioner is blocked;
③
Ambient humidity is too
high.
①
The horizontal tilt angle of product shall
be within 15°;
②
Check whether there are foreign matters
in the water tank blocking the water ow;
③
Please connect the drain pipe for manual
drainage.

EcoFlow Wave 2 Specifications

General

Type	Monobloc mobile air conditioner
Wi-Fi	Yes
Noise level	56 dB
Refrigerating medium	R290
Cooling capacity (max)	5100 BTU/h
Heating capacity (max)	6100 BTU/h
Air conditioner functions	Cooling, Heating
Operating temperature (T-T)	5 - 50 °C
Refrigerating medium weight	130 g
Suitable for room area up to	10 m²
Cooling capacity in watts (max)	1500 W
Heating capacity in watts (max)	1800 W
International Protection (IP) code	IPX4
Cooling capacity in watts (nominal)	- W
Heating energy efficiency (COP, W/W)	-
Connected load	820 W
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (cooling)	550 W
Power consumption (heating)	600 W
Hourly energy consumption (cooling)	- kWh
Product color	Black, Grey

Weight and Dimensions

Depth	297 mm
Width	518 mm
Height	336 mm
Weight	14500 g