EcoFlow Wave 2 User Manual

6
LCD
Refer to Fault Indication and Troubleshooting for solutions in case of error alarms.
1. Wi-Fi/Bluetooth
2. Water level indication
3. External drainage indication
4. Cooling/Heating/Fan function
5. Max/Sleep/Eco mode
6. Fan speed
7. Timing (Supported in app settings only)
8. Remaining charge/discharge time
9. Add-on battery charge indication
10. Temperature setting/Error code
11. Error alarm
12. Ambient/air outlet temperature
Introduction to light effect
Breathing blue Cooling status
Breathing
orange
Heating status
Breathing white Fan status
Red light
constant on
Error alarm
Flashing white
Firmware
update

EcoFlow Wave 2 Specifications

General

Type	Monobloc mobile air conditioner
Wi-Fi	Yes
Noise level	56 dB
Refrigerating medium	R290
Cooling capacity (max)	5100 BTU/h
Heating capacity (max)	6100 BTU/h
Air conditioner functions	Cooling, Heating
Operating temperature (T-T)	5 - 50 °C
Refrigerating medium weight	130 g
Suitable for room area up to	10 m²
Cooling capacity in watts (max)	1500 W
Heating capacity in watts (max)	1800 W
International Protection (IP) code	IPX4
Cooling capacity in watts (nominal)	- W
Heating energy efficiency (COP, W/W)	-
Connected load	820 W
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (cooling)	550 W
Power consumption (heating)	600 W
Hourly energy consumption (cooling)	- kWh
Product color	Black, Grey

Weight and Dimensions

Depth	297 mm
Width	518 mm
Height	336 mm
Weight	14500 g