17
MANUAL FOR ECOSOFT PINK SOFTENERS
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2024
10. GUARANTEE
WARRANTY OBLIGATIONS
The warranty period of the water puricaon system is 12 months and is counted from the day
of sale of the system through the retail network (unless otherwise stated in the product warranty
card).
The manufacturer guarantees that this water puricaon system does not contain manufacturing
defects and that such defects will not be detected during the warranty period specied in the
warranty card, from the moment of sale from the manufacturer’s warehouse or retail network, in
the event that the puricaon system is installed and operates in accordance with the technical
requirements and operang condions. Before using the water puricaon system, be sure to
read the instrucons for connecng and operang the water puricaon system and the terms
of the warranty obligaons.
Carefully check the appearance of the water puricaon system and its completeness. Submit all
claims regarding appearance and completeness to the seller upon receipt of the product.
We reserve the right to make changes to the design, conguraon, or manufacturing technology,
such changes do not impose obligaons to replace or improve previously released products.
The warranty card is valid only if the model, date of sale, and clear stamps of the seller are
correctly specied.
Consumer claims, in accordance with current legislaon, can be submied during the warranty
period of operaon, provided that the defects of the water puricaon system did not arise as a
result of:
- non-observance of the condions of operaon and storage of systems specied in the
instrucons for connecon and operaon of the system;
- caused by transport damage, incorrect installaon, careless use or misuse, connecon to a
power supply voltage that does not correspond to that specied in the operang instrucons,
failure to follow the aached connecon and operang instrucons;
- operaon with unremedied defects, or with defects that arose as a result of maintenance or
repair by persons or organizaons that are not representaves of an authorized service center;
- causes independent of the manufacturer, such as: power supply voltage drops, natural
phenomena, and natural disasters, re, ingress of foreign objects (liquids) or other substances
into the product;
- external and internal contaminaon, scratches, cracks, bruises, abrasions, and other mechanical
damage that occurred during operaon;
- changing the design or unauthorized opening of system nodes, when changing the serial number
of the product or the date of manufacture;
- unmely replacement of elements, the terms of which are indicated in the instrucons for
connecon and operaon, as well as when using replaceable elements of other manufacturers.
To Next Page
Loading...
Need help?
General
