Ecosoft PINK Series User Manual

11
MANUAL FOR ECOSOFT PINK SOFTENERS
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2024
Aer installing and powering up an Ecoso FU or FK system,set display language, water hardness,
current me, and regeneraon opons in the Installer menu of control valve.
Use and buons to change seng; NEXT buon to save and go to next step; CLOCK to save
and exit menu; REGEN to move back one step.
To proceed, hold NEXT and buons simultaneously
for 3 seconds.
STEP 2I. Hardness: Set the amount of hardness as
calcium carbonate per PPM, using or .
Press NEXT to go to Step 4I.
Press REGEN to exit Installer Display Sengs
STEP 3I. Service Water Hardness (PPM): If a mixing
valve is installed in the valve, service hardness needs
to be set. Seng range is always less than the seng
in Step 2I. This screen will only appear if Step 4S is set
to rES. Press NEXT to go to Step 4I. Press REGEN to
return to previous step.
STEP 4I. Set Day Override to 1 – 28 days or OFF using
or . Press NEXT to go to Step 5I. Press REGEN to
return to previous step.
6. QUICK SET UP GUIDE

Ecosoft PINK Series Specifications

General

Brand	Ecosoft
Model	PINK Series
Category	Water Dispenser
Language	English