OPERATING PROCEDURES
For Tornado
To remove or insert the battery
The battery is fully inserted in the
battery holder, to remove the battery,
turn the key to the "Off" position and
press the key to "UNLOCK" position, lift
up the battery along with the holder and
remove or insert the battery. The key
switch must be in the unlock position to
slide the battery in and out.
Power on/off switch ( See the
photo )to turn on/off the power. Switch
To charge the battery, plug the charger into an AC outlet. Then plug the charger plug
into the charging port on the bike(see the photo).
To Next Page
Loading...
