EN
15
3. Operating and Programming
Edge Cleaning Mode
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DEEBOT cleans along a border (e.g. wall).
3
ECOVACS App.
3.4 Programming the Robot
Spot Cleaning Mode
(1-5 minutes)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning Mode,
2
*
Empty the Reservoir and remove the Cleaning Cloth Plate before cleaning on carpet.
*
When using the mopping system, fold area rug edges under themselves so DEEBOT will
avoid the rug.
*
*
Empty any remaining water from the Reservoir and remove the Cleaning Cloth Plate before
charging DEEBOT.
*
Always keep the Reservoir installed when the robot is cleaning or charging.
3.5 Optional Mopping System
DEEBOT has an optional Mopping System using a Washable/Reusable Microfiber Cleaning
Cloth and Cleaning Cloth Plate attached to a proprietary Reservoir. The washable/reusable
Cleaning Cloth automatically damp mops the floor to a spotless clean.
To Next Page
