1
DEEBOT is not
charging.
DEEBOT has not connected to
the Charging Dock.
Be sure that the robot’s Charging
Contacts have connected to the
Charging Dock Pins.
The battery is completely
discharged.
Re-activate the battery. Switch ON
DEEBOT. Place DEEBOT on the
Charging Dock by hand, remove after
charging for 3 minutes, repeat 3 times;
then charge normally.
2
DEEBOT cannot
return to the Charging
Dock.
The Charging Dock is not
correctly placed.
Refer to section 3.2 to correctly place
the Charging Dock.
3
DEEBOT gets stuck
while working and
stops.
DEEBOT is tangled with
something on the floor
(electrical wires, curtains,
carpet fringing, etc.).
DEEBOT will try various ways to free
itself. If it is unsuccessful, manually
remove the obstacles and restart.
4
DEEBOT returns to
the Charging Dock
before it has finished
cleaning.
When the battery gets low,
DEEBOT automatically
switches to Return to Charger
Mode and returns to the
Charging Dock to recharge
itself.
This is normal. No solution necessary.
To Next Page
Loading...
