Charging Dock.|
32. WARNING: For the purposes of recharging the battery, only use the detachable supply unit YJS015F-
1900600G/DK18-190060H-V provided with this appliance.
33. The Remote Control requires two non rechargeable AAA batteries. To replace the battery of the Remote
Control, please turn over the Remote Control, press and remove its Battery Cover. Remove the batteries, and
insert the new batteries with the correct polarity. Reassemble the Battery Cover.
34. Non-rechargeable batteries are not to be recharged.
35. Different types of batteries or new and used batteries are not to be mixed.
36. Batteries of the Remote Control are to be inserted with the correct polarity.
37. Exhausted batteries are to be removed from the Appliance and safely disposed of.
38. If the Remote Control is to be stored unused for a long period, the batteries should be removed.
39. The supply terminals are not to be short circuited
SAVE THESE INSTRUCTIONS
To disable Wi-Fi module on DEEBOT, power the robot ON.
Place the robot on the Docking Station making sure the Charging Contacts on DEEBOT and the Docking Station
Pins make a connection.
Press and hold the AUTO Mode Button on the robot for 10 seconds until DEEBOT emits 3 beeps.
To enable Wi-Fi module on DEEBOT, power the robot OFF and then power ON. The Wi-Fi module is turned on when
DEEBOT is restarted
For EU Countries
For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance
Correct Disposal of this Product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To recycle your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can safely recycle this product
Package Contents
Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design
and specifications are subject to changes without notice
Product Diagram