Cleaning the Main Brush
Turn the robot over. Push the two tabs on the Main Brush Cover to remove it.
Remove the Main Brush.
Use the provided Cleaning Tool to remove any hair tangled around the Main Brush.
4.2 Main Brush and Side Brushes
Cleaning the Side Brushes
Remove the Side Brushes with a screwdriver.
Wipe the Side Brushes clean with a dry cloth.
4.3 Other Components
Wipe the Anti-Drop Sensors with the brush
side of the provided Cleaning Tool to maintain
their effectiveness.
Use the provided Cleaning Tool to remove
any hair tangled around the Universal Wheel.
4. Maintenance
To Next Page
Loading...
