ECOVACS DEEBOT T10 PLUS - Charging the DEEBOT; Empty Station Placement and Power Connection; Powering On and Initiating Charge

11
EN
Keep the area around the Station clear of objects and reective object surfaces.
Charging DEEBOT
1
2
Connect the Power Cord
Empty Station Placement and Assembly
Note: Please do not place the Empty Station on the carpet.
>
0
.5
m
(1
.6
4
’)
>
0
.5
m (1
.6
4
’)
> 1.8m (5.9’)
DEEBOT cannot be charged when being powered OFF.
4
3
Charge DEEBOT
Power ON
Note: I = ON, O = OFF.
6.5
Please make sure that DEEBOT starts cleaning from the Station. Do not move
the Station while cleaning.
When cleaning is complete,it is recommended to remove the Mopping Pad and
manually place DEEBOT into the Station.