ECOVACS DEEBOT T10 PLUS - Operating the DEEBOT; Starting Cleaning and First Use; Pausing, Waking Up, and Returning to Charge

12
EN
1
Start
For the rst-time cleaning, please ensure that DEEBOT is fully charged.
Operating DEEBOT
2
Pause/Wake Up
Note: The robot’s Control Panel stops glowing after the robot is paused for a
few minutes. Tap the AUTO Mode Button on DEEBOT to wake up the robot.
3
Tap for 3 seconds to send DEEBOT back to the Empty Station.
Return to Charge
Install Air Freshener
Tap
Click
During the rst cleaning:
1. Please make sure to install Air Freshener to create a home
map,including carpet area in ECOVACS HOME App
2. Please ensure that DEEBOT is fully charged.
3. Please supervise DEEBOT and assist it should there be a problem.