ECOVACS DEEBOT T10 PLUS - OZMO Pro 3.0 Mopping System; Mopping System Preparation and Installation; Starting Mopping Operation

13
EN
OZMO™ Pro 3.0 Oscillating Mopping System
Add Water
Note:
1.Install OZMO™ Pro 3.0 Oscillating Mopping System for oor scrubbing.
2.Before installing OZMO™ Pro 3.0 Oscillating Mopping System, please make sure the contacts are thoroughly dry.
3.Please avoid using OZMO™ Pro 3.0 Oscillating Mopping System on the carpet.
4. It is recommended to drench and wring out the Mopping Pad before installing it to have a better cleaning.
1
*
To prolong the service life of OZMO™ Pro 3.0 Oscillating Mopping System, it
is recommended to use puried water or ECOVACS DEEBOT Cleaning Solu-
tion. Explore more accessories at https://www.ecovacs.com/global.
*
Do not soak OZMO™ Pro 3.0 Oscillating Mopping System in water.
2
Dry Contacts Thoroughly
3
Install OZMO™ Pro 3.0 Oscillating Mopping System
4
Start Cleaning
Click