ECOVACS DEEBOT T10 - OZMO Pro 3.0 Oscillating Mopping System; Add Water; Dry Contacts Thoroughly; Install OZMO Pro 3.0 Oscillating Mopping System

13
EN
Add Water
Note:
1. Install OZMO™ Pro 3.0 Oscillating Mopping System for oor
scrubbing.
2. Before installing OZMO™ Pro 3.0 Oscillating Mopping System,
please make sure the contacts are thoroughly dry.
3. Please avoid using OZMO™ Pro 3.0 Oscillating Mopping System on
the carpet.
4. It is recommended to drench and wring out the Mopping Pad before
installing it to have a better cleaning.
1
*
To prolong the service life of OZMO™ Pro 3.0 Oscillating Mopping System, it
is recommended to use puried water or ECOVACS DEEBOT Cleaning Solu-
tion. Explore more accessories at https://www.ecovacs.com/global.
*
Do not soak OZMO™ Pro 3.0 Oscillating Mopping System in water.
2
Dry Contacts Thoroughly
3
Install OZMO™ Pro 3.0 Oscillating Mopping System
4
Start Cleaning
Click
OZMO™ Pro 3.0 Oscillating Mopping System