23
EN
No. Malfunction Possible Causes Solutions
4
DEEBOT returns to the Auto-Empty
Station before it has nished
cleaning.
Working time varies according to oor surface,
room complexity and the Cleaning Mode selected.
When the battery gets low, DEEBOT automatically
switches to Recharge Mode and returns to the
Auto-Empty Station to recharge itself.
Turn on Continuous Cleaning function in ECOVACS HOME App.
DEEBOT will automatically resume the uncompleted cleaning
cycle when Continuous Cleaning is enabled.
DEEBOT is unable to reach certain areas blocked
by furniture or barriers.
Tidy up the area to be cleaned by putting furniture and small
objects in their proper place.
The Auto-Empty Station is too distant from the
center of the house.
Please place the Auto-Empty Station against the wall of a central
room of the house.
5
DEEBOT does not clean
automatically at the scheduled time.
Time Scheduling function is cancelled.
Program DEEBOT to clean at specic times using the ECOVACS
HOME App.
DEEBOT is switched OFF. Switch ON DEEBOT.
The robot’s battery is low.
Keep DEEBOT switched ON and connected to the Auto-Empty
Station to make sure it has a full battery to work at any time.
6
DEEBOT misses cleaning spots to
be cleaned, or repeats cleaning the
area cleaned.
The cleaning cycle is interfered by small objects or
barriers on the oor.
Remove power cords and small objects from the oor to ensure
cleaning efciency. DEEBOT will automatically clean the area
missed, please avoid moving DEEBOT manually or block the path
during the cleaning cycle.
DEEBOT is working on slippery polished oors. Make sure the oor wax is dried before DEEBOT starts cleaning.
DEEBOT is unable to reach certain areas blocked
by furniture or barriers.
Tidy up the area to be cleaned by putting furniture and small
objects in their proper place.
The TrueMapping Distance Sensor is blocked.
Remove the objects that are blocking the TrueMapping Distance
Sensor.
To Next Page
Loading...
