11 EN
1
1.Wet the mopping pad
2.Twist the mopping pad
3.Stick the mopping pad
Before using, wet the mopping pad.
Twist the mopping pad to wring water out. To ensure cleaning
performance, wring it out as much as you can.
Stick the mopping pad onto the velcro at the bottom of WINBOT,
with its groove corresponding to the blue mark. Then press it with
your hands to help the mopping pad stick firmly.
Install Mopping Pad
Wide Side
Wide Side
Narrow Side
Narrow Side
2.2 Preparation before Use
To Next Page
Loading...
