To Next PageTo Next Page
Need help?Do you have a question about the EcoWater 3500 Series and is the answer not in the manual?
Details coverage periods for parts, workmanship, and general terms.
Setting the salt level indicator for the brine tank.
Overview of the main menu options for controlling operations.
Adjusting the salt level indicator based on the brine tank.
Configuring the alarm for when salt is low.
Specifying the type of salt used (NaCl or KCl).
How to manually initiate a recharge cycle for adequate water supply.
Adjusting the unit's clock after power loss or for accuracy.
Adjusting the automatic recharge start time.
Fine-tuning the water hardness setting.
Configuring the unit to account for iron in the water.
Selecting operational modes for salt efficiency or capacity.
Setting the maximum interval between automatic recharges.
Configuring the auxiliary output for external devices.
Setting parameters for chemical feed pump activation.
Programming or clearing service reminders.
Transmitting diagnostic data via telephone.
Accessing system diagnostics for troubleshooting.
Repeating setup or restoring default settings.
Step-by-step process to add devices to the remote.
How to check wireless signal strength for devices.
Initiating a manual recharge via the remote.
Adjusting the recharge schedule using the remote.
Selecting which data points appear on the remote's status screens.
Customizing which functions can be controlled via the remote.
Instructions for adding salt and setting the salt level.
How to identify and fix salt bridges in the brine tank.
Procedure for cleaning the nozzle and venturi assembly.
Procedures to safely relieve pressure before servicing.
A checklist of common issues to verify first.
How the system self-diagnoses malfunctions and displays error codes.
Steps to clear error codes after a problem is resolved.
Accessing detailed diagnostic information.
General| Brand | EcoWater |
|---|---|
| Model | 3500 Series |
| Category | Water Filtration Systems |
| Language | English |
